Inventions and other News by Dane Scarborough

Win the $1,000.00 QuickDraw Challenge

Win the $1,000.00 QuickDraw Challenge

tape measure competition
Win the $1,000.00 QuickDraw Challenge - $1000 dollars and bragging rights go to the first professional builder/carpenter to measure and mark faster than me (I'm Dane, the inventor of the QuickDraw).  You must use an un-modified Stanley tape measure (i.e. Stanley FatMax, PowerLock, etc. We all know Stanley makes really great tapes with lots of standout, so this should be fun  - More details at: www.quickdrawtapes.com 

Top rated tape measure

Top rated tape measure

Top rated tape measure review - We’ve all been there, in that moment when we’re ready to make our mark, and realize we don’t have a pencil behind our ear... so we put the tape measure down, and we’re off on mission to find a damm pencil... 5 minutes later, we’re ready to get it done, and the pencil lead breaks !@%#^! OK, calm down, we just need to find something to sharpen it with... 

Point being, if you work with a tape measure everyday, or just once in a while on a home project, you will love the new innovation of the QuickDraw self-marking tape measure, but it’s much more than that. It also: 

1. makes a perfect circle 

2. gives you an extra hand to hold the blade in place for a more accurate mark

3. duplicates measurements easily

4. makes difficult measurements easy

5. saves time and frustration by never having to look for a pencil (or a sharpener) again  

Best Selling Tape Measure

Best Selling Tape Measure

Best selling tape measure - Quickdraw pro is a self-marking tape measure that eliminates the need for a pencil altogether.  Imagine having an extra hand to hold the blade steady while you make your mark, exactly where you want it. 

 

Inventing the QuickDraw Marking Tape Measure

Inventing the QuickDraw Marking Tape Measure

I was in second grade when a kid challenged me to roll a quarter down the center of my face. He said, “You can’t do it, it’s impossible!” I took the quarter and proved him wrong, to which he replied, “Oh, I guess I was wrong.” He then walked away laughing. Unbeknownst to me, he had rubbed pencil graphite on the edge of the quarter, so I was walking around with a black line right down the center of my face.
Flash forward: I’m a grown man, with a family, building my house in Sun Valley, Idaho. It’s snowing, my ears are cold, my skin is dry, and countless pencils have already fallen from the perch on my ear into snowdrifts, lost until spring for sure. I’m using a Stanley Power-lock tape measure to frame the second floor and I’ve just lost my last pencil. SOB#%^@#! So, I start using the edge of the tape case to indent the wood. This was the beginning of the idea that would eventually become the QuickDraw Pro marking tape measure.
Already having had success as an inventor (The Levelution System Level was performing increasingly well), I knew I was onto something. I did patent searches, and discovered there were over sixty patents on the idea of a marking tape measure, yet nothing was on the market? This was strange, because I knew firsthand that it was a great idea. I analyzed all the existing patents and discovered that they all had the same flaws. Simply put, if you have to engage a marking mechanism (that would be a pencil), then lock the blade, then make your mark, then dis-engage the marker, then dis-engage the lock, well, forget it, it’s going to be easier to use a pencil.

Bob the One-Armed Carpenter...

Bob the One-Armed Carpenter...

Once upon a time...

There was a one-handed carpenter named Bob... Bob used a regular tape measure and held a pencil in his mouth, to make a mark... Life was hard for Bob... no matter how great a carpenter Bob was, he was paid very little. Then one fateful day, a new guy showed up, using some kind of magical self-marking tape measure...

Bob blinked to be sure his eyes weren’t playing tricks on him... Bob asked the new guy, “can I try it?” Sure Bob, you’ll love it, cuz it’s like having an extra hand... indeed it was... But how does it work? Well Bob, there’s a small steel wheel, that rolls out graphite, so there’s nothing to sharpen... nothing to break... and Bob, it’ll make 2000 marks per load... Bob went right out and bought a QuickDraw Pro Tape, and lived happily ever after...

The QuickDraw tape measure gave Bob the ability to make a good living... For the two-handed carpenter, the QuickDraw just makes everything that much easier...

https://youtu.be/XFyTweYfYtk

What do you want to build today...? Starting a new project, a building project to be precise, is exciting!

What do you want to build today...? Starting a new project, a building project to be precise, is exciting!

Starting a new project, a building project to be precise, is exciting! Figuring out your materials list, and using 10% of your budget for new toys (tools) is one of my favorite parts. Another is the smell of fresh cut lumber, and you know why, because there's something primal about building. Working with your hands to manifest  something in the real world, from something you've only imagined in your mind. It's a guys way of giving birth, in a way.

The story behind the QuickDraw marking tape

The story behind the QuickDraw marking tape

The story behind the QuickDraw marking tape  -  I was in second grade when a kid challenged me to roll a quarter down the center of my face. He said “You can’t do it, it’s impossible!”. I took the quarter and proved him wrong, to which he replied “oh, I guess I was wrong”, and he walked away laughing. Unknown to me, he had rubbed pencil graphite on the edge of the quarter, so I was walking around with a black line down the center of my face. Flash forward to me building my house in the Sun Valley Idaho. It’s snowing, my ears are cold, my skin is dry, and countless pencils have already fallen from the perch on my ear, into snowdrifts, lost until spring for sure. I’m using a Stanley Power-lock tape measure to frame the second floor and I’ve just lost my last pencil. SOB#%^@#! So, I start using the edge of the tape case to indent the wood. This was the beginning of the idea that would eventually become the QUICKDRAW Pro marking tape measure.

Imagine your tape measure making 2000 marks per load...

Imagine reloading in 10 seconds...

Imagine it working with one hand...

Imagine it making a radius or circles...

Save $3000 a year, upgrading to the QuickDraw Marking Tape Measure

Save $3000 a year, upgrading to the QuickDraw Marking Tape Measure

The average carpenter spends 15+ minutes every day, looking for a pencil, sharpening a pencil, looking for something to sharpen a pencil with, etc.. That's a lot of time, and it adds up to approximately $3000 per year (based on 15 minutes a day at $30 per hour).

The only tape measure that makes 2000 marks per load.
Reloads in 10 seconds.
Measure and mark with one hand.
Draw a radius or circle, instantly 

These are a few of other factors that make the QuickDraw Pro tape, the new   standard on the job site:

1.  A new break lock that captures the blade (top and bottom) with rubber grips, and the break button is co-molded with soft rubber, guaranteed to lock the blade solid. 

2. A new patented spool system for the smoothest blade action of any tape on the market.

3. A new (patent pending) Tru-View™ WEDGE™ indicator that insures greater accuracy than our original (patent pending Tru-View™ indicator).      

4.  An improved marking system for easer reloads and more consistent marking. 5. A new extra heavy-duty spring steel belt clip with an industrial chrome finish.

6. Upgraded star-drive fasteners that secure the tape housing.

7. An injection molded screen printed logo on the front (no stick-on labels for the QUICKDRAW® PRO. 

8. The New QUICKDRAW® key chain for holding extra graphite, includes the QUICKDRAW® marker technology built-in.

9. A nylon safety strap (optional, for working in high places).

10. New blade layouts (optional: Imperial 25’ &16”, Metric 8M &5M, EZ-READ™ 25’ &16’, Imperial/Metric 26’/8M, 16’/5M.

11.  New .9mm white ceramic refills for dark materials and metal work.

QD25-PROEZ

  

Top Rated Tape MeasureWhat do you want to build today?

Marking Dark materials with the NEW QUICKDRAW

Marking Dark materials with the NEW QUICKDRAW

Black graphite comes standard in all QuickDraw marking tape measures, but now WHITE GRAPHITE refills (technically white ceramic) is available, and these refills work in all QuickDraw Pro models. 

For everyone that works with metal, or any dark, hard to mark, materials that black graphite doesn't mark, you will love this option. The bright white mark is easy to see, and you'll get approximately 1000+ 1/4" marks. Reloads are fast and easy. No tools required, just follow the simple video on our website, and it will take less than 10 seconds. Oh, and the white graphite works in all QUICKDRAW models including the 16' and 25' QUICKDRAW Pro

QuickDraw: Marking Tape Measure Review

QuickDraw: Marking Tape Measure Review

The new QuickDraw Pro (Red), is the ultimate tape measure.  It has the following improvements and features over the QuickDraw (Black) DIY model: 

1.  A new break lock that captures the blade (top and bottom) with rubber grips, and the break button is co-molded with soft rubber, guaranteed to lock the blade solid. 

2. A new patented spool system for the smoothest blade action of any tape on the market.

3. A new (patent pending) wedge Tru-View indicator that insures even greater accuracy then our original (patent pending Tru-View indicator).      

4.  An improved marking system for easer reloads and more consistent marking. 5. A new extra heavy-duty chrome belt clip.

6. Upgraded star-drive fasteners that secure the tape housing.

7. An injection molded screen printed logo on the front (no cheap stick on labels for the QuickDraw Pro. 

8. A QuickDraw Pro key chain for holding extra graphite, and it also has the QuickDraw marker built-in (optional).

9. A nylon safety strap (optional, for working in high places).

10. New blade layouts (optional: Imperial 25’ &16”, Metric 8M &5M, EZ-READ 25’ &16’, Imperial/Metric 26’/8M, 16’/5M.

11.  New .9mm white ceramic refills for dark materials and metal work.